Heat pipe solar collector

Tri-element vacuum tube: 58 x 1, 800mm, 47 x 1, 500mm
Heat pipe: 0.8mm in diameter
Flowing passage: 1.2 mm thick high quality

Product Description
Solar vacuum tube with heat pipe
Tri-element vacuum tube: 58 x 1, 800mm, 47 x 1, 500mm
Heat pipe: 0.8mm in diameter
Flowing passage: 1.2 mm thick high quality rose copper
Outer chest: 0.2mm thick aluminum alloy
Bracket: 1.8mm thick aluminum alloy
Hail resistance: Diameter 25mm
Insulation layer: 50mm thich rockwool
Heat preservation: 72 hours
Maximum working pressure: 0.6mPa
Warranty: 3 years international responsibility for free repairing or exchange due to original
quality problems
(2)DMG tube collector (KD-DC)
The DMG tube collector is mainly composed of vacuum tube heat pipe and manifold. Also, the
exhalation part of the heat - absorption wing of the vacuum tube heat pipe i s placed in the one side
of is connected by the advanced metal connection technique. The glass tube is extracted high
vacuum degree. The part which put out the pipeline of condensation part can meet the liquid of the
main pipe of the manifold by the linker. So the heat can be passed by convection.
During work hours, the heat absorption wing with selective absorption coat will take in sunlight,
then, pass it to the condensation part to change the heat transfer medium of the heat pipe. In this
way, the liquid will be changed into solid, then move up to the condensation part. The heat
exchange can be made through the liquid which come from the linker and the main pipeline of the
manifold. After the exchange, the heat exchange medium will cool into liquid from solid, then back
to the exhalation part. According to this circulation, the temperature of the main pipeline of the
manifold will be raised and commute again with the medium of the tank under the compulsive
circulation. The water temperature will be raised under this way.
DMG tube collector bears the following
advantages:
High heat efficient, can work all year long,
advanced heat exchange method. The
favorable sun selective absorption coating and
high vacuum heat preservation condition is the
guarantee of the system working with high
efficient.
Heat capacitance is small, while the startup is
quick. It can be started up to output energy
within two minutes. The highest smolder
temperature can up to 250.
It uses the heat exchange medium to transfer
the heat. Further, there is no water in the
vacuum tube. These two measures prevent
channel jam and power output failure from forming furring, settling bedload. It can still operate in
the event of occasional tube breakages. It is convenient to fix and maintain.
Antifreezing, Hail Impact Resistance: the high performance of the heat-pipe energy exchanging
method ensure the system still can be worked in the thirty degrees below zero centigrade, and can
resist the impact of the hails whose diameter is less than 25mm.
High vacuum degree: the heat-absorption wing is packed in the Boro-silicate glass tube which
vacuum can reach 5*10^-3Pa, and even worked in the moist area, it can also without any
corrosion.
Endure the high pressure: the hot water system can endure 0.6PA, so it can be connected to the
city regular water system directly, and work under the pressure.